Most of us agree that buying wood glue is easy. You can walk into the store or hardware store, supermarket, or order online. Thanks to improving technology, modern products are very reliable. They dray and cure mug faster, form a stronger bond, and you also need a smaller amount. Also, they aren’t so messy and are also quite easy to clean. The many products and stiff competition have seen the prices become more affordable. However, not every product, that claims to be the best, will serve you right. It may take too long to dry, will leave a messy appearance, contains toxic compounds, or won’t work with some types of wood. But will all types of products, which is the best wood glue? To find the answer, we decided to compare the top selling products in the market. By the time you are done reading this review, we believe you’ll be knowledgeable. Also, you’ll have a favorite pick.
The Top 9 Best Wood Glues
Tips to Creating the Perfect Bond
You may have the best wood glue but still, it doesn’t keep the pieces stuck together. It may hold for and a while then come apart, or it may separate after slight pressure. Usually, it’s never about the product, but the process itself. In the following read, will give you tips on creating the perfect bond.
Ensure The Pieces Are Clean
Wood glue, like many other products, doesn’t like a dirty, dusty, oily, greasy, or wet surface. These things prevent the molecules from adhering to the materials. In fact, some may actually make it disintegrate and effective. It’s essential you ensure the parts to be stuck together are clean. This may include cleaning them, sanding them with sandpaper, sander, or file, and also using cleaning agents such as cleaning alcohol. Proper preparation is important to a firm strong bond.
Make The Pieces Damp
It’s always recommended to make the sections damp, NOT wet. You can do this by lightly brushing with a wet brush or pressing a moist cloth. Wet wood or timber attracts the molecules better. It opens up the minute holes and this allows the glue to penetrate deeper. Most are water based and will, therefore, adhere to the glue molecules. And as it starts to dry, due to loss of moisture, the glue becomes stronger. NB: Too much water dilutes the glue and makes it less effective. In fact, it may work in the opposite manner where the wood repels the glue molecules instead of attracting them.
Apply The Right Amount
The common misconception so that the more the glue the stronger the bond. This is far from the truth. Too much glue is as ineffective as too little glue. A small amount won’t create the right connection since the glue molecules will be scattered. It’s like expecting light showers to make the soil soggy. Lots of glue tends to bind to it when curing rather than the wood. It also takes a longer time and may create a mess. Every product has its directions and it’s essential to adhere to what the manufacturer says. Talking to an expert is also a step in the right direction.
Let It Dry First
Wood glue, similar to products like leather glue, requires exposure to the air first. This activates the binding agents or molecules that make it stick to the object. How long you should expose it to the air depends on several things. These include the amount applied, the humidity or temperature in the air, type of wood, glue concentration and more. NB: Some types, such as Cyanoacrylate or Epoxy glue (resin & hardener mix), don’t need airing. They will work instantly after application.
Clamp Them Together
For the best connection, it’s advised to apply some pressure to the pieces being joined. If it’s a light piece, for instance, a small veneer strap on a strip of wood, you can apply hand pressure, if using Epoch or Cyanoacrylate wood glue. For large projects that comprise several big pieces, it’s most effective if you use clamps or vices to hold the parts together. You should place a piece of wood, rubber, leather, or any other safe material between the project/wood and the clamping jaws. This helps to prevent damage or leaving marks on the job.
Allow Adequate Curing/Drying Time
There is usually a confusing between curing and drying. The first terminology normally talks about the active ingredients creating a good bond. This will start taking place after application, when applying pressure and will carry on even after removing the clamping system. The glue may have cured but may not have attained its strength yet. It may look dry on the outside but still lacks the binding strength. Drying is normally physical appearance. It will be hard to touch but may not have fully cured. The product will specify both curing and drying periods.
The above review showcases the best products you’ll get in the market. To single them out, it was critical we pay attention only to the most essential things. These are/were, binding strength, application ease, consistency, versatility, reliability, and easy cleaning. The last thing on anyone’s mind is having a not-so-appealing project. You also don’t want to wait for too long for the glue to cure or dry, or struggle cleaning the excess glue. The above products have passed the tests when it comes to effectiveness and reliability. And as you see, they enjoy amazing reviews from experts, hobbyists, Do-it-Yourselfers (DIYers), and reviewers. With any of these items, you’ll have the best wood glue for your project. You are also assured of good final results, durability, strong bonds, and safety.